Instrument Panel Compartment Door Lock Striker Replacement

Instrument Panel Compartment Door Lock Striker Replacement

Removal Procedure




1. Open the instrument panel (I/P) compartment door.
2. Remove the retaining screws from the striker on the underside of the I/P carrier.
3. Remove the striker from the I/P.

Installation Procedure




1. Align the striker to the I/P, placing the striker ends at the holes in the underside of the I/P carrier.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the striker retaining screws and tighten to 1.9 Nm (17 lb in).
3. Close the I/P compartment door and verify the operation of the latch to the striker.