Engine Oil Cooler Hose/Pipe Replacement

Engine Oil Cooler Hose/Pipe Replacement

Special Tools

J 38185 - Hose Clamp Pliers

Removal Procedure

1. Drain the coolant. Refer to Cooling System Draining and Filling (GE 47716) (Service and Repair)Cooling System Draining and Filling (Static Fill) (Service and Repair).
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair)
3. Remove the front compartment lower noise shield. Refer to Front Compartment Lower Noise Shield Replacement (All Wheel Drive) (Front Compartment Lower Noise Shield Replacement)Front Compartment Lower Noise Shield Replacement (Rear Wheel Drive) (Front Compartment Lower Noise Shield Replacement)




4. Reposition the engine oil cooler hose clamp (1) at radiator hose using J 38185 - Hose Clamp Pliers.
5. Remove the engine oil cooler hose (2) from the radiator hose.




6. Reposition the engine oil cooler hose clamp (1) at engine using J 38185 - Hose Clamp Pliers.
7. Remove the engine oil cooler hose (2) from the engine.
8. Remove the engine oil cooler bolt (4) from the engine.
9. Disconnect the engine oil cooler hoses (3) from the engine.
10. Remove the engine oil cooler hoses from the vehicle.

Installation Procedure




1. Install the engine oil cooler hoses to the vehicle.
2. Connect the engine oil cooler hoses (3) to the engine.
3. Install the engine oil cooler bolt (4) form the engine.
4. Install the engine oil cooler hose (2) to the engine.
5. Reposition the engine oil cooler hose clamp (1) at engine using J 38185 - Hose Clamp Pliers.




6. Install the engine oil cooler hose (2) to engine.
7. Reposition the engine oil cooler hose clamp (1) at radiator hose using J 38185 - Hose Clamp Pliers.
8. Install the front compartment lower noise shield. Refer to Front Compartment Lower Noise Shield Replacement (All Wheel Drive) (Front Compartment Lower Noise Shield Replacement)Front Compartment Lower Noise Shield Replacement (Rear Wheel Drive) (Front Compartment Lower Noise Shield Replacement)
9. Lower the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair)
10. Fill the coolant. Refer to Cooling System Draining and Filling (GE 47716) (Service and Repair)Cooling System Draining and Filling (Static Fill) (Service and Repair).