Engine Mount Replacement - Right

Engine Mount Replacement - Right Side (w/AWD)

Removal Procedure





1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service Intervals) .
2. Remove the right engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side (w/RWD) (Service and Repair)Engine Mount Bracket Replacement - Right Side (w/AWD) (Service and Repair) .
3. Remove the right side front axle shaft. Refer to Front Wheel Drive Shaft Replacement (Left) (Front Wheel Drive Shaft Replacement - Left)Front Wheel Drive Shaft Replacement (Right) (Front Wheel Drive Shaft Replacement - Right) .
4. Remove the upper engine mount retaining nut.
5. Remove the lower engine mount retaining nut.
6. Using the engine support fixture, raise the engine enough to remove the engine mount.
7. Remove the engine mount from the vehicle.



Installation Procedure





1. Install the engine mount to the vehicle.
2. Using the engine support fixture, lower the engine.

Notice: Refer to Fastener Notice (Fastener Notice) .

3. Install the lower engine mount retaining nut.

Tighten the nut to 80 N.m (59 lb ft).

4. Install the upper engine mount retaining nut.

Tighten the nut to 80 N.m (59 lb ft).

5. Install right side front axle shaft. Refer to Front Wheel Drive Shaft Replacement (Left) (Front Wheel Drive Shaft Replacement - Left)Front Wheel Drive Shaft Replacement (Right) (Front Wheel Drive Shaft Replacement - Right) .
6. Install the right engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side (w/RWD) (Service and Repair)Engine Mount Bracket Replacement - Right Side (w/AWD) (Service and Repair) .
7. Lower the vehicle.