Differential Housing Support Bushing Replacement (Right )

Differential Housing Support Bushing Replacement (Right )

Special Tools

DT-48060-A Bushing Remover/Installer


Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair) .
2. Remove the rear differential assembly. Refer to Differential Replacement (Differential Replacement) .





Important: Apply a small amount of clean oil on the threads of the DT-48060-A .



Important: Check the bore of the bushing for any damage. If there is any damage found, cracks, etc., replace the differential assembly.


3. Using the DT-48060-A , remove the differential housing support bushing.



Installation Procedure





1. Using the DT-48060-A , install the differential housing support bushing.
2. Install rear differential assembly. refer to Differential Replacement (Differential Replacement) .
3. Remove the support and lower the vehicle.