Power Steering Cooler Pipe/Hose Replacement (Cooler to Power Steering Reservoir)

Power Steering Cooler Pipe/Hose Replacement (Cooler to Power Steering Reservoir)

Removal Procedure

1. Remove the air cleaner assembly.
2. Remove the fuel injector sight shield.




3. Compress the clamp and disconnect the power steering cooler pipe/hose from the power steering reservoir.
4. Raise the vehicle. Refer to Vehicle Lifting.




5. Remove the retaining clip (1) and disconnect the power steering cooler pipe/hose from the cooler.




6. Remove the 2 power steering pipe/hose routing bolts.
7. Remove the power steering cooler pipe/hose from the vehicle.

Installation Procedure

1. Position the power steering cooler pipe/hose to the vehicle.





Notice: Refer to Fastener Notice.

2. Install the 2 power steering pipe/hose routing bolts.

Tighten the 2 power steering pipe/hose mounting bolts to 11 N.m (97 lb in).




3. Connect the power steering cooler pipe/hose to the cooler and install the retaining clip (1).
4. Lower the vehicle.




5. Compress the clamp and connect the power steering cooler pipe/hose to the power steering reservoir.
6. Install the fuel injector sight shield.
7. Install the air cleaner assembly.
8. Fill and bleed the power steering system. Refer to Power Steering System Bleeding.