Instrument Panel Compartment Trim Bezel Replacement

Instrument Panel Compartment Trim Bezel Replacement

Removal Procedure




1. Remove the striker from the I/P compartment.
2. Remove the retaining screws which attach the trim bezel to the I/P compartment.
3. Pull the trim bezel outward to access the electrical connectors
4. Remove the valet lockout switch from the trim bezel.
5. Remove the bezel from the I/P compartment.

Installation Procedure




1. Align the trim bezel to the I/P compartment.
2. Install the valet lockout switch to the bezel.

Notice: Refer to Fastener Notice.

3. Install the retaining screws to the trim bezel.

Tighten the screws to 1.9 N.m (17 lb in).

4. Install the striker to the I/P compartment.