Hood Open Assist Rod Stud Replacement

Hood Open Assist Rod Stud Replacement

Removal Procedure

1. Open the hood.






Caution: Refer to Hood Hold-Open Device Caution.

2. Release the clip retaining the hood assist rod to the lower hood assist rod ball stud. Refer to Hood Open Assist Rod Replacement.
3. Remove the lower hood assist rod ball stud (1) from the front structure (2).

Installation Procedure






Notice: Refer to Fastener Notice.

1. Install the lower hood assist rod ball stud (1) to the front structure (2).

Tighten to 9 N.m (80 lb in).

2. Install the hood assist rod.
3. Insure that the clip is fully seated on the hood assist rod.
4. Close the hood.