Folding Top Headlining Trim Panel Replacement

Folding Top Headlining Trim Panel Replacement

Removal Procedure




1. Manually open the folding top as shown in the illustration. Refer to Folding Top Manual Operation.
2. Remove the trim panel retainer from the folding top headliner.




3. Remove the retaining screws at the rear of the folding top roof panel.
4. Remove the side trim panel retainer from the folding top headliner.
5. Lower the headliner from the folding top panel.
6. Disconnect the electrical connector to the intrusion sensor, if equipped.
7. Remove the headliner assembly.

Installation Procedure




1. Install the headliner to the vehicle.
2. Connect the electrical connector to the intrusion sensor.
3. Install the headliner to the folding top panel.
4. Install the side trim panel retainer to the folding top headliner.

Notice: Refer to Fastener Notice.

5. Install the retaining screws at the rear of the folding top roof panel.

Tighten the screws to 2.5 N.m (22 lb in).

6. Install the trim panel retainer to the folding top headliner.
7. Manually close the folding top. Refer to Folding Top Manual Operation.