Stabilizer Shaft Link Replacement (FE7)

Stabilizer Shaft Link Replacement (FE7)

Removal Procedure




1. Raise and support the vehicle. Refer to vehicle Lifting.
2. Remove the tires and wheels.
3. Remove the stabilizer shaft link bolt and nut.
4. Remove the stabilizer shaft link washers, insulators, and spacer.

Installation Procedure





Notice: Refer to Fastener Notice.

1. Install the stabilizer link insulators, washers, spacer, nut and bolt.

Tighten the stabilizer link nut to 23 N.m (17 lb ft).

2. Install the tire and wheel.
3. Lower the vehicle.