Hood Primary Latch Striker Replacement

Hood Primary Latch Striker Replacement

Removal Procedure




1. Open the hood.
2. Using a wax pencil, mark the location of the hood striker on the underside of the hood.

Important: Retain the fasteners for the hood latch striker/plates or replace with new.

3. Remove the fasteners (1) securing the hood striker (2) to the hood.
4. Remove the hood striker from the hood.

Installation Procedure




1. Using the alignment marks, position the hood latch striker to the alignment marks.

Notice: Refer to Fastener Notice.

2. Install the fasteners (1) in order to secure the hood striker (2) to the hood.

Tighten the fasteners to 9 N.m (80 lb in).

3. Close the hood.