Amplifier: Service and Repair

Amplifier Replacement

Removal Procedure

1. Remove the rear compartment trim.




2. Remove the nuts securing the amplifier to the vehicle.
3. Disconnect the electrical connectors.
4. Remove the amplifier from the vehicle.

Installation Procedure




1. Connect the electrical connectors.
2. Install the amplifier to the studs on the wheel house.

Notice: Refer to Fastener Notice.

3. Install the nuts securing the amplifier the vehicle.

Tighten the nuts to 9 N.m (80 lb in).

4. Reinstall the rear compartment trim.
5. Refer to Programming and RelearningProgramming and Relearning