Global Positioning System Antenna: Service and Repair

Global Positioning System (GPS) Antenna Replacement

Removal Procedure

1. Remove the I/P retainer.




2. Remove the screws (1) securing the global position antenna to the I/P carrier.

Important: Do not splice the wiring or make the antenna lead shorter.

3. Remove the wiring from the carrier.

Installation Procedure




1. Route the antenna wire to the carrier.

Notice: Refer to Fastener Notice.

2. Install the antenna to the carrier.

Tighten the screws (1) to 2 N.m (18 lb in).

3. Install the I/P retainer.