Exhaust Manifold Heat Shield Replacement - Right Side

Exhaust Manifold Heat Shield Replacement - Right Side (LP1, LY7)

Removal Procedure

Caution: Refer to Exhaust Service Caution.

Caution: Refer to Protective Goggles and Glove Caution.




1. Remove the upper exhaust manifold heat shield bolts.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the exhaust manifold heat shield lower bolt.
4. Remove the exhaust manifold heat shield.




5. Remove the lower exhaust manifold heat shield retainers (1), if necessary.
6. Remove the lower exhaust manifold heat shield (2), if necessary.

Installation Procedure




1. Install the lower exhaust manifold heat shield (2), if necessary.
2. Install the lower exhaust manifold heat shield retainers (1), if necessary.




3. Install the exhaust manifold heat shield.
4. Install but do not tighten the exhaust manifold heat shield lower bolt.
5. Lower the vehicle.

Notice: Refer to Fastener Notice.

6. Install the exhaust manifold heat shield upper bolts.

Tighten the bolts to 10 N.m (89 lb in).

7. Raise and support the vehicle. Refer to Vehicle Lifting.
8. Tighten the exhaust manifold heat shield lower bolt.

Tighten the bolt to 10 N.m (89 lb in).

9. Lower the vehicle.