Oil Pick Up/Strainer: Service and Repair

Oil Pump Pipe and Screen Assembly Replacement
Removal Procedure
1. Remove the engine oil pan.





2. Remove the oil pump pipe support bracket nut.
3. Remove the oil pump pipe bolt.
4. Remove the oil pump pipe and screen assembly.





5. Remove and discard the oil pump pipe gasket.

Installation Procedure





1. Lubricate the silicone seal in the oil manifold plate. With a twisting motion, install the end of the oil pump pick-up tube.

2. Notice: Refer to Fastener Notice in Service Precautions.

Install the oil pump pick-up retaining bolt and nut.
^ Tighten the oil pump pick-up tube nut to 24 Nm (18 ft. lbs.).
^ Tighten the oil pump pick-up tube bolt to 10 Nm (89 inch lbs.).
3. Install the oil pan.