Turn Signal Lamp: Description and Operation

TURN SIGNAL LAMPS

With the ignition switch in the RUN position, the turn signal lamps will illuminate when the driver places the turn signal switch in the right or left positions. The instrument panel module (IPM) monitors the signal circuit of the turn signal/multifunction switch. The IPM relays the turn signal switch status to the rear integration module (RIM) via the GMLAN serial data circuit. The RIM uses the status of the turn signal switch to command the turn signals ON and OFF. The RIM controls both front and rear turn signals. The IPM also sends a message via GMLAN to the instrument panel cluster (IPC) to enable the turn signal indicators located in the IPC ON and OFF depending on the position of the turn signal switch. Voltage is supplied to the front and rear turn signals by the RIM. Ground is provided to the front turn signals at G104. The rear turn signals are grounded at G401 and G402. The turn signal/multifunction switch is grounded at G200. The rear turn signal functions are performed by the quarter mounted tail lamps. The rear turn signal lamps consist of red lenses and light emitting diodes (LED) instead of incandescent bulbs.