Engine Cooling Fan Bracket Replacement

Engine Cooling Fan Bracket Replacement (LY7)
Removal Procedure





1. Remove the engine cooling fan.
2. Remove the fan bracket to engine block bolts .
3. Remove the fan bracket from the vehicle.





4. Remove the adapter studs from the crankshaft balancer, if necessary.

Installation Procedure





1. Notice: Refer to Fastener Notice in Service Precautions.

If previously removed, install the adapter studs to the crankshaft balancer .
^ Tighten the engine cooling fan adapter studs to 22 Nm (16 ft. lbs.).





2. Align the adapter assembly to the studs on the crankshaft.
3. Install the fan adapter to the engine.
4. Install the fan adapter to engine block bolts.
^ Tighten the fan adapter to engine block bolts to 50 Nm (37 ft. lbs.).
5. Install the engine cooling fan.