Instrument Panel Center Trim Panel Replacement

INSTRUMENT PANEL CENTER TRIM PANEL REPLACEMENT

REMOVAL PROCEDURE




1. Remove the radio.
2. Remove the HVAC control.
3. Remove the center HVAC air outlet.
4. Remove the screws securing the instrument panel (I/P) center trim panel.

INSTALLATION PROCEDURE




1. Position the center trim panel to the I/P.
2. Install the screws securing the I/P center trim panel.Install the screws securing the I/P center trim panel.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2 N.m (18 lb in).
3. Install the center HVAC air outlet.
4. Install the HVAC control.
5. Install the radio.