Rear Shelf: Service and Repair

SHELF CARRIER REPLACEMENT - REAR

REMOVAL PROCEDURE
1. Remove rear shelf trim panel.




2. Remove the four fasteners securing the carrier assembly to the rear shelf.
3. Disengage the retainer securing the right side rear shelf carrier.
4. Disconnect the electrical connectors.
5. Remove the rear shelf carrier assembly (1).

INSTALLATION PROCEDURE
1. Install rear shelf carrier assembly (1).
2. Ensure the retainer on the right side is fully seated into the rear shelf.
3. Connect the electrical connectors.




4. Install the rear shelf carrier fasteners.

NOTE: Refer to Fastener Notice.

Tighten the rear shelf carrier fasteners to 9 N.m (80 lb in).
5. Install the rear shelf trim panel.
`