Shift Control Knob Replacement

Shift Control Knob Replacement

Removal Procedure





1. Remove the cover (3) from knob (1) and allow the cover to slide down the transmission control (2).
2. Loosen allen-head fastener.
3. Remove knob from the floor shift control.

Installation Procedure





1. Install the knob onto the shift floor shift control.
2. Tighten the allen head fastener securing the knob to the control lever.
Tighten the shift control knob screw to 5 Nm (4 ft. lbs.).
3. Slide the cover (3) up and attach to the shift control knob (1).