Scan Tool Data Definitions

Scan Tool Data Definitions

Remote Control Door Lock Receiver (RCDLR)
Battery Voltage
Display indicates battery voltage. Measured in volts.

Ignition 1
Display indicates ON when the ignition 1 input circuit of the module receives a battery signal from the ignition switch.

Shift Lock Solenoid Command
The scan tool displays the commanded state of the solenoid when the brake pedal is applied/unapplied.

Shift Lock Solenoid State
The scan tool displays the actual feedback state of the solenoid monitored by the RCDLR.

Transmission Control Module (TCM)
TCC Brake Switch
Displays ON or OFF status of the TCC Brake switch.

TR Sw. A/B/C/P
Displays LOW or HI for the state of each of the four inputs from the IMS. LOW displayed indicates a low voltage signal (0 volts) being monitored at the TCM. HI displayed indicates a high voltage signal (B+) being monitored at the TCM.