Air Bag Deactivation Switch: Service and Repair
INFLATABLE RESTRAINT INSTRUMENT PANEL (I/P) MODULE DISABLE SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Open the instrument panel (IP) passenger compartment door (1).
2. Use a small flat blade screwdriver behind the top right hand side of the switch mounting to pry the inflatable restraint IP module switch (4) from the switch mounting in the instrument panel (IP) passenger compartment door (1).
3. Remove the CPA (2) from the wiring harness connector (3).
4. Disconnect the wiring harness connector (3) from the inflatable restraint IP module switch (4) connector.
INSTALLATION PROCEDURE
1. Connect the wiring harness connector (3) to the inflatable restraint IP module switch (4) connector.
2. Install the CPA (2) on the wiring harness connector (3).
3. Insert the inflatable restraint IP module switch (4) into the switch mounting in the instrument panel (IP) compartment door (1) and snap into place.
4. Close the instrument panel (IP) passenger compartment door (1).