Rear Wheel Alignment

Rear Camber Adjustment





1. Loosen the lower control arm cam bolt nuts.
2. Rotate the cam bolts to the required camber specification setting. Refer to Wheel Alignment Specifications.

Notice: Refer to Fastener Notice in Service Precautions.

3. Maintain the camber setting while tightening the cam bolt nuts.
^ Tighten the rear lower control arm front bolt nut to 145 Nm (107 ft. lbs.).
^ Tighten the rear lower control arm rear bolt nut to 90 Nm (71 ft. lbs.).

Important: Check the toe setting AFTER changing camber or caster.

4. Check the camber setting after tightening.
Adjust the camber setting if necessary.

Rear Toe Adjustment





1. Loosen the rear suspension adjustment link lock nut (1).
2. Rotate the inner tie rod (2) to the required toe specification setting. Refer to Wheel Alignment Specifications.

Notice: Refer to Fastener Notice in Service Precautions.

3. Tighten the rear suspension adjustment link lock nut.
^ Tighten the rear suspension adjustment link lock nut to 60 Nm (44 ft. lbs.),
4. Check the toe setting after tightening.
5. Adjust the toe setting if necessary.