Fog/Driving Lamp Bulb: Service and Repair

FOG LAMP BULB REPLACEMENT - FRONT

REMOVAL PROCEDURE
1. Remove the front fascia lower close out panel.
2. Disconnect the front fog lamp electrical connector from the fog lamp bulb/socket.




3. Remove the fog lamp bulb/socket from the fog lamp by rotating the bulb/socket counterclockwise (1).

CAUTION: Refer to Halogen Bulb Caution in Service Precautions.




4. Remove the fog lamp bulb/socket (1).

INSTALLATION PROCEDURE




1. Install the bulb/socket (1) to the fog lamp.




2. Rotate the bulb/socket clockwise (1) until the bulb/socket is fully seated.
3. Connect the front fog lamp electrical connector to the fog lamp bulb/socket.
4. Inspect the fog lamp for proper operation.
5. Install the front fascia lower close out panel.
6. Aim the fog lamp. Refer to Fog Lamp Aiming Procedure.