140. Exhaust Manifold Installation - Left

Exhaust Manifold Installation - Left





1. Install the bell housing.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the bell housing bolts.
^ Tighten the bell housing bolts to 50 Nm (37 ft. lbs.).





3. Install the right engine flywheel housing cover.
4. Install the right engine flywheel housing cover bolts.
^ Tighten the exhaust manifold studs to 10 Nm (89 inch lbs.).





5. Install the left engine flywheel housing cover.





6. Install the left engine mount bracket.
7. Install the left engine mount bracket bolts.
^ Tighten the engine mount bracket bolts to 58 Nm (43 ft. lbs.).





8. Install the left engine mount.
9. Install the left engine mount upper nut.
^ Tighten the engine mount upper nut to 58 Nm (43 ft. lbs.).





10. Install the left exhaust manifold studs to the left cylinder head.
^ Tighten the exhaust manifold studs to 6 Nm (53 inch lbs.).





11. Install the NEW left exhaust manifold gasket.





12. Install the left exhaust manifold.
13. Install the left exhaust manifold bolts to the left cylinder head and bell housing.





14. Tighten the exhaust manifold bolts and nuts in the sequence shown.
^ Tighten the exhaust manifold bolts and nuts to 25 Nm (18 ft. lbs.).





15. Tighten the left exhaust manifold bolt to the bell housing.
^ Tighten the left exhaust manifold bell housing bolt to 50 Nm (37 ft. lbs.).





16. Install the left exhaust manifold heat shield.
17. Install the left exhaust manifold heat shield bolts.
^ Tighten the exhaust manifold heat shield bolts to 10 Nm (89 inch lbs.).