13. Crankshaft Balancer Removal

Crankshaft Balancer Removal

^ Tools Required
- EN 46326 Flywheel Holding Tool
- J 38416-2 Crankshaft Button
- J 41816 Crankshaft Balancer Remover





1. Install the EN 46326.





2. Remove the crankshaft balancer bolt.





3. Place the J 38416-2 into the end of the crankshaft.
4. Install the J 41816 on the crankshaft balancer.





5. Remove the crankshaft balancer using the J 41816.