Radiator Cooling Fan Control Module: Service and Repair

Cooling Fan Control Module Replacement

Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.





2. Disconnect the cooling fan control module electrical connector.





3. Remove the cooling fan control module retaining bolt.
4. Remove the cooling fan control module from the vehicle.

Installation Procedure





1. Install the cooling fan control module to the vehicle.

2. Notice: Refer to Fastener Notice in Service Precautions.

Install the cooling fan control module retaining bolt.
^ Tighten the bolt to 6 Nm (53 inch lbs.).





3. Connect the cooling fan control module electrical connector.
4. Lower the vehicle.