Blower Replacement - Ventilation Heat and Cool - Passenger Seat

BLOWER REPLACEMENT - VENTILATION HEAT AND COOL - PASSENGER SEAT

REMOVAL PROCEDURE
1. Remove the seat.
2. Cut the tie straps to the blower from the seat ductwork.




3. Disconnect the electrical connection to the blower assembly.
4. Remove the screws from the blower to the seat bottom.
5. Remove the blower assembly from the seat bottom.

INSTALLATION PROCEDURE




1. Install the blower assembly to the seat bottom.
2. Install the blower assembly screws to the seat bottom.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2.5 N.m (22 lb in).

3. Connect the electrical connection to the blower assembly.
4. Install the seat ductwork to the blower. Secure the ductwork with new tie straps.
5. Install the seat.