Instrument Panel Compartment - Trim Bezel Replacement

Trim Bezel Replacement - Instrument Panel (I/P) Compartment

Removal Procedure




1. Remove the striker from the I/P compartment.
2. Remove the retaining screws which attach the trim bezel to the I/P compartment.
3. Pull the trim bezel outward to access the electrical connectors
4. Remove the valet lockout switch from the trim bezel.
5. Remove the bezel from the I/P compartment.

Installation Procedure




1. Align the trim bezel to the I/P compartment.
2. Install the valet lockout switch to the bezel.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the retaining screws to the trim bezel.

Tighten the screws to 1.9 N.m (17 lb in).

4. Install the striker to the I/P compartment.