Microphone Replacement - Radio Volume Compensator Interior

MICROPHONE REPLACEMENT - RADIO VOLUME COMPENSATOR INTERIOR

REMOVAL PROCEDURE
1. Remove the knee bolster trim panel.




2. Remove the 2 retaining screws from the microphone.
3. Remove the microphone from the knee bolster trim panel.

INSTALLATION PROCEDURE
1. Install the microphone to the knee bolster trim panel.




2. Install the 2 retaining screws to the microphone.

Tighten the screws to 2.5 N.m (22 lb in).

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the knee bolster trim panel.