Garnish Molding Replacement - Center Pillar (With RPO Code WC2, WC8)

GARNISH MOLDING REPLACEMENT - CENTER PILLAR (WITH RPO CODE WC2, WC8)

REMOVAL PROCEDURE




1. Remove the weatherstrip from the front and the rear doors.
2. Pull the edge of the trim (1) away from the armor plating (2).
3. Rotate the trim towards the rear seat in order to release the retaining edge of the trim.

INSTALLATION PROCEDURE




1. Install the trim to the vehicle.
2. Rotate the trim (1) towards the front seat until the trim snaps into the armor plating (2).
3. Install the weatherstrip to the front and the rear doors.