Garnish Molding Replacement - Windshield Pillar (With RPO Code WC2, WC8)

Garnish Molding Replacement - Windshield Pillar (WC2, WC8)

Removal Procedure





1. Remove the front door weatherstrip. Refer to Weatherstrip Replacement - Front Door Opening (Weatherstrip Replacement - Front Door Opening) in Doors.
2. Pull the outside edge of the trim (1) away from the armor plating (2).
3. Rotate the trim towards the windshield in order to release the retaining edge of the trim.



Installation Procedure





1. Install the windshield side of the trim.
2. Rotate the trim (1) towards the door opening until the trim snaps into the armor plating (2).
3. Install the front door weatherstrip. Refer to Weatherstrip Replacement - Front Door Opening (Weatherstrip Replacement - Front Door Opening) in Doors.