Connecting Rod, Engine

Connecting Rod Bolts
First Pass 20 Nm (15 ft. lbs.)
Final Pass 85 degrees
Connecting Rod
Connecting Rod Bearing Clearance
Production 0.023-0.065 mm (0.0009-0.0025 inch)
Service 0.023-0.076 mm (0.0009-0.003 inch)
Connecting Rod Bore Diameter - Bearing End 56.505-56.525 mm (2.224-2.225 inch)
Connecting Rod Bore Out-of-Round - Bearing End
Production 0.006 mm (0.00023 inch)
Service 0.006 mm (0.00023 inch)
Connecting Rod Side Clearance 0.11-0.51 mm (0.00433-0.02 inch)
Crankshaft
Connecting Rod Journal Diameter - Production 53.318-53.338 mm
(2.0991-2.0999 inch)
Connecting Rod Journal Diameter - Service 53.308 mm (2.0987 inch)
Connecting Rod Journal Out-of-Round - Production 0.005 mm (0.0002 inch)
Connecting Rod Journal Out-of-Round - Service 0.01 mm (0.0004 inch)
Connecting Rod Journal Taper - Maximum for 1/2 of Journal Length
Production 0.005 mm (0.0002 inch)
Service 0.02 mm (0.00078 inch)