Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com

Oil Temperature Sensor/Switch: Service and Repair



Engine Oil Temperature Gage Sensor Replacement
Removal Procedure





1. Raise the vehicle. Refer to Vehicle Lifting.
2. Disconnect the engine oil temperature gage sensor electrical connector.
3. Remove the engine oil temperature gage sensor (732).

Installation Procedure





1. Notice: Refer to Fastener Notice in Service Precautions.

Install the engine oil temperature gage sensor (732).
Tighten the engine oil temperature gage sensor to 20 Nm (15 ft. lbs.).
2. Connect the engine oil temperature gage sensor electrical connector.
3. Lower the vehicle.