85. Throttle Body Assembly Installation

Throttle Body Installation





1. Notice: Handle the electronic throttle control components carefully. Use cleanliness in order to prevent damage. Do not drop the electronic throttle control components. Do not roughly handle the electronic throttle control components. Do not immerse the electronic throttle control components in cleaning solvents of any type.

Important: DO NOT use the throttle body gasket again. Install a NEW gasket during assembly.

Install the throttle body gasket (509) to the intake manifold.





2. Notice: Refer to Fastener Notice in Service Precautions.

Install the throttle body and bolts.
Tighten the throttle body bolts to 12 Nm (106 inch lbs.).
3. Install the engine coolant air bleed hose and clamp.