Seal Replacement - Torque Converter

Seal Replacement - Torque Converter

^ Tools Required
- J 8092 Universal driver Handle
- J 44766 Seal Installer
- J 45000 Seal Remover

Removal Procedure
1. Remove the transmission torque converter.





2. Remove and discard the torque converter seal bolts.
3. Remove the torque converter seal using J 45000.

Installation Procedure





1. Assemble J 8092 onto J 44766.
2. Install the torque converter seal onto the tool before installing into the case to prevent damage to the seal.

3. Important: Align the torque converter seal with the bolt holes.

Install the torque converter seal into the torque converter housing.

4. Notice: Install the torque converter seal bolts.

Tighten the NEW torque converter seal bolts to 3.6 Nm (32 inch lbs.).
5. Install the transmission torque converter.