Air Cleaner Fresh Air Duct/Hose: Service and Repair

AIR CLEANER INTAKE DUCT REPLACEMENT

REMOVAL PROCEDURE




- Turn the ignition OFF.
- Remove the positive crankcase ventilation (PCV) hose from the air cleaner duct resonator.
- Loosen the air cleaner duct clamps.
- Remove the air cleaner duct.

INSTALLATION PROCEDURE




- Install the air cleaner intake duct.
- Install the PCV hose to the intake duct resonator.
- Tighten the air cleaner duct clamps.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
- Tighten the air cleaner duct clamp at the mass air flow (MAF) sensor to 4 N.m (35 lb in).
- Tighten the air cleaner duct clamp at the throttle body to 7 N.m (35 lb in).