Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Balancer ReplacementTools Required
^ J24420-C Harmonic Balancer Puller
Removal Procedure
1. Remove the A/C compressor and power steering pump drive belt.
2. Remove the generator and water pump drive belt.
3. Raise and support the vehicle.
4. Use the J24420-C in order to remove the crankshaft balancer.
Installation Procedure
1. Install the crankshaft balancer.
2. Install the generator and water pump drive belt.
3. Install the A/C compressor and power steering pump drive belt.