Closeout/Insulator Panel Replacement - Left

Closeout/Insulator Panel Replacement - Left

Removal Procedure





1. Remove the screws (2) securing the closeout panel to the I/P.
2. Disconnect the courtesy lamp electrical connector (1).
3. Remove the closeout panel from the I/P.



Installation Procedure





1. Connect the courtesy lamp electrical connector (1).
2. Align the closeout panel on the I/P.
Notice: refer to Fastener Notice in Cautions and Notices.


3. Install the closeout retaining fastener (2).

Tighten the fasteners to 2 Nm (18 lb in).