Module Replacement - Ventilation Heat and Cool - Seat Cushion
MODULE REPLACEMENT - VENTILATION HEAT AND COOL - SEAT CUSHIONREMOVAL PROCEDURE
1. Remove the seat cushion bottom from the adjuster.
2. Disconnect the electrical connectors.
3. Remove the screws (1) that attach the module (2) to the seat cushion frame.
4. Remove the module from the cushion frame.
INSTALLATION PROCEDURE
1. Install the module to the cushion frame.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the screws (1) that attach the module (2) to the seat cushion frame.
Tighten
Tighten the screws to 3 N.m (26 lb in).
3. Connect the electrical connectors.
4. Install the seat cushion bottom to the adjuster.