Bank 2

Secondary Air Injection (AIR) Shut-Off Valve Replacement - Bank 2


REMOVAL PROCEDURE
1. Remove the Air Cleaner Assembly.







2. Disconnect the vacuum lines.







3. Loosen and lower the pinch clamp connecting the bank 2 intermediate pipe/hose to the bank 2 shut-off valve.
4. Disconnect the hose from the shut-off valve.







5. Remove the two nuts (1) securing the bank 2 AIR shut-off to the bracket.
6. Remove the bank 2 AIR shut-off valve (2) from the bracket.








INSTALLATION PROCEDURE
1. Install the bank 2 AIR shut-off valve (2) and new gasket to the bank 2 outlet pipe.
2. Install the two nuts (1) securing the shut-off valve to the bracket.

NOTE: Refer to Fastener Notice in Service Precautions. Vehicle Damage Warnings


Tighten
Tighten the three nuts to 9 N.m (80 lb in).







3. Install the bank 2 intermediate pipe/hose and clamp to the shut-off valve.







4. Install the vacuum lines.
5. Install the air cleaner assembly.