Sun Visor: Service and Repair

Sunshade Replacement

Removal Procedure





1. Remove the three fasteners from the outboard bezel.
2. Pull the sunshade down until the electrical connector is exposed.
3. Disconnect the electrical connector.
4. Remove the sunshade.
5. Remove the fastener from the sunshade support.
6. Remove the sunshade support (1).



Installation Procedure





1. Install the sunshade support (1).
2. Install the sunshade support fastener.
3. Connect the electrical connector.
4. Push the electrical connector and wiring above the headliner.
5. Align the sunshade outboard bezel with the holes in the retainer.
6. Install the 3 fasteners.