Hood Latch Support Replacement

Hood Latch Support Replacement

Removal Procedure

1. Open the hood.
2. Remove the hood latch. Refer to Hood Latch Replacement (Hood Latch Replacement).
3. Disconnect the ambient outside air temperature sensor electrical connector.




4. Remove the lower bolts (1) retaining the hood latch support (2) to the vehicle.




5. Remove the upper bolts (1) retaining the hood latch support (2) to the vehicle.
6. Remove the hood latch support (2) from the vehicle.



Installation Procedure





1. Install the hood latch support (1) to the vehicle.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the bolts (3) to retain the hood latch support (1) to the vehicle.

Tighten the bolts (3) to 9 N.m (80 lb in).

3. Install the hood latch. Refer to Hood Latch Replacement (Hood Latch Replacement).
4. Connect the ambient outside temperature sensor electrical connector.
5. Close the hood.