Turn Signal Bulb: Service and Repair
PARK/[1][2]TURN SIGNAL LAMP BULB REPLACEMENTREMOVAL PROCEDURE
1. Remove the headlamp assembly. Refer to Headlamp Replacement (SLS, W/O TT6, TT7 or TT8) or Headlamp Replacement (STS and SLS with TT6, TT7 or TT8).
2. Depress the tang (1) on the park/turn lamp socket (3) and turn it counter clockwise, in order to release it from the headlamp assembly (3).
3. Remove the park/turn lamp socket (3) from the headlamp assembly (2).
4. Remove the park/turn lamp bulb from the socket.
INSTALLATION PROCEDURE
1. Install the park/turn lamp bulb into the socket.
2. Install the park/turn lamp socket (3) into the headlamp assembly (2).
3. Turn the park/turn lamp socket (3) clockwise to secure it into the headlamp assembly (2).
4. Install the headlamp assembly into the vehicle. Refer to Headlamp Replacement (SLS, W/O TT6, TT7 or TT8) or Headlamp Replacement (STS and SLS with TT6, TT7 or TT8).
"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes