U45

REMOVAL PROCEDURE




1. Remove the radio from the IP in order to disconnect the GPS antenna connection at the radio.
2. Remove the Instrument Panel (IP) upper trim pad.

IMPORTANT: Note the GPS antenna cable routing in order to route the GPS antenna cable properly during assembly.

3. Remove the antenna cable hold down clips.
4. Remove the retainer (1) from the GPS antenna assembly.
5. Remove the GPS antenna (2) from the IP.

INSTALLATION PROCEDURE




1. Install the GPS antenna (2) assembly to the IP.
2. Route the GPS antenna cable as noted during disassembly.
3. Install the GPS antenna retainer (1).
4. Install the radio.
5. Install the IP upper trim pad.

"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes