Driver Information Center Switch Replacement

REMOVAL PROCEDURE

CAUTION: Refer to SIR Handling Caution in Service Precautions.




1. Remove the IP cluster trim panel.
2. Remove the fasteners from the drivers information switch.




3. Remove the drivers information switch from the IP cluster trim panel.

INSTALLATION PROCEDURE




1. Install the drivers information switch to the IP cluster trim panel.

NOTE: Refer to Fastener Notice in Service Precautions.




2. Install the fasteners.

Tighten
Tighten the fasteners to 2 N.m (18 lb in).

3. Install the IP cluster trim panel.