2-3 Shift Solenoid Replacement
2-3 Shift Solenoid ReplacementRemoval Procedure
1. Remove the transmission oil pan and filter.
2. Disconnect the electrical connector from solenoid valve.
3. Remove the retaining pin (2). Use pliers to pull pin out.
4. Remove the solenoid valve (1).
Installation Procedure
1. Install the solenoid valve (1).
2. Install the retaining pin (2). Use a soft mallet to drive the retaining pin in.
3. Connect the electrical connector to the solenoid valve.
4. Install the transmission filter and the transmission oil pan.