Fuel Pressure Gage Installation and Removal

INSTALLATION PROCEDURE

TOOLS REQUIRED
^ J 34730-1A Fuel Pressure Gauge
^ J 42242 Fuel Pressure Gauge Adapter

CAUTION:
^ Refer to Gasoline/Gasoline Vapors Caution in Service Precautions.
^ Refer to Fuel Gage Leak Caution in Service Precautions.

NOTE: Refer to Fuel and Evaporative Emission (EVAP) Hose/Pipe Connection Cleaning Notice in Service Precautions.

1. Install the J 42242 to the fuel pressure service connection at the rear of the upper intake plenum.
2. Install the J 34730-1A to the J 42242.
3. Turn ON the ignition.

CAUTION: Refer to Fuel Storage Caution in Service Precautions.

4. Place the bleed hose of the fuel pressure gage into an approved gasoline container.
5. Open the bleed valve on the fuel pressure gage in order to bleed the air from the fuel pressure gage.
6. Command the fuel pump ON with a scan tool.
7. Close the bleed valve on the fuel pressure gage.
8. Inspect for fuel leaks.