Center Mounted Brake Lamp: Service and Repair
HIGH MOUNTED STOP LAMP REPLACEMENTREMOVAL PROCEDURE
1. Remove the rear compartment lid finish panel.
2. Remove the electrical connector from the high-mount stoplamp (3).
3. Remove the high-mount stoplamp nuts (1).
4. Remove the high-mount stoplamp (3).
INSTALLATION PROCEDURE
1. Install the high-mount stoplamp (3).
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the high-mount stoplamp nuts (1).
Tighten
Tighten the high-mount stoplamp nuts to 2 N.m (18 lb in).
3. Install the electrical connector to the high-mount stoplamp (3).
4. Install the rear compartment lid finish panel.