Sunshade Replacement

Sunshade Replacement

Removal Procedure




1. Remove the screws (1) from the sunshade and the vanity mirror support.
2. Disconnect the electrical connector (2) from the sunshade and the vanity mirror (if equipped).
3. Remove the sunshade and the vanity mirror (3).

Installation Procedure




1. Install the electrical connector (2) to sunshade and the vanity mirror (3) (if equipped).
2. Install the sunshade and the vanity mirror (3).

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the screws (1) to the sunshade and the vanity mirror support.

Tighten the sunshade and the vanity mirror support screw to 1.9 Nm (17 lb in).