Air Outlet Replacement - Floor Console
AIR OUTLET REPLACEMENT - FLOOR CONSOLEREMOVAL PROCEDURE
1. Move the driver and passenger front seats to the full forward position.
2. Remove the rear vent housing upper screws from the center console if required.
3. Remove the rear vent housing side screws from the center console.
4. Remove the electrical harness from the lighter and heated seat switches.
5. Remove the rear vent housing from the center console.
6. Remove the rear heated seat switch panel from the rear vent housing if required.
INSTALLATION PROCEDURE
1. Install the rear heated seat switch panel to the rear vent housing if required.
2. Install the electrical harness to the lighter and heated seat switches.
3. install the rear vent housing to the center console.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the rear vent housing side screws to the center console.
Tighten
Tighten the rear vent housing console side screws to 2 N.m (18 lb in).
5. Install the rear vent housing upper screws to the center console if required.
Tighten
Tighten the rear vent housing upper screws to 2 N.m (18 lb in).
6. Return the driver and passenger front seats to the original position